Roof leaks are typically caused when a home is damaged by severe weather. This includes strong wind, battering rain, and hail. The size of the leak will dictate type of temporary repair that are able to use on your roof. You can choose from many roof leak repair options. A permanent repair for a roof will require hiring a roofing company.
Sheeting
Measure the area of the roof where the leaking occurs by using a tape measure. Measure and cut pieces of plastic that will completely cover the leak or leaks on the roof. Run a bead of caulk around the edges of the leaking areas. Place a piece of the cut plastic over the leak and press it onto the caulk. Leave it to dry for about six hours. This will seal off the leaking area of the roof until you can arrange to have your roof permanently repaired. If you do not have any plastic sheeting, then rolls can be found at your local home improvement store.
If you do not want to use caulk, then another option will be needed. Measure and cut a piece the plastic sheeting to a size that will cover the leak on your roof. Staple the ends of the plastic onto a two-by-four board. The boards will keep the plastic from blowing off of the roof. Set the two-by-four boards on the roof and stretch the plastic over the leak. Nails can be used to secure the boards to the roof. The plastic will keep the roof from leaking until a permanent fix can be found.
Tarp
This is a solution that is similar to the use of plastic sheeting. The use of a tarp is a good solution if the roof has lost a section of shingles. A trap will cover more area and will hang over both sides of the roof to cover the leaking area. Nail one side of the tarp to a two-by-four board. Set this board along the eave line of the roof. Run the tarp over the roof to the other side and roll the end around another two-by-four board. Nail this board to the roof sheathing. Place more two-by-four boards along the perimeter of your tarp and nail to the roof.
Roofing Paper
The use of roofing paper is a good option for a temporary roof patch. Cover the leaking area of the roof with roofing cement. Apply the roofing cement by using a trowel. Roll the roofing paper onto your roof and cut with a pair of scissors or a utility knife. Overlap the edges of roofing paper and cover the seams with the roofing cement. This will temporarily prevent your roof from leaking.
Roofing Tar
Holes or cracks in asphalt shingles can easily be patched by using roofing tar. This is a product that you can find at any home improvement store. Roofing tar comes in cans that look similar to a can of paint. Applying the roofing tar to a hole or crack on shingles can be done with a wood paint stirrer. The tar is sticky and will be difficult to clean if you use a putty knife or another tool. Apply roofing tar over the hold or crack liberally. Smooth the tar and let it dry to seal the leak.
If a storm has caused damage to your roof, waiting to contact a roofing professional could cause more issues. For experts in the field, call G&G Roofit for your roof repair in Burleson.
About the author
Source: http://blog.homespothq.com/2012/10/diy-temporary-patch-kit-for-a-leaky-roof/
Happy 4th of July 4th Of July Desserts fireworks fireworks 4th of July Andy Griffith joe johnson
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.